Asterisk-Vicidial-Goautodial-Vicibox-Vicidialnow-FreePBX Installation
Step by Step Installation
Vicidial scratch installation in Centos 6.9 , with asterisk 11, latest dahdi and latest SVN version
Vicidial scratch installation in Centos 6.X with Asterisk 11 , latest Vicidial
Steps Involved
1. Centos 6.X os installation
2. Dependencies , supporting software and CPAN Modules
3. Asterisk , dahdi , libpri installation
4. Vicidial installation
1. Centos 6.X os installation
2. Dependencies , supporting software and CPAN Modules
3. Asterisk , dahdi , libpri installation
4. Vicidial installation
Step 1 : Centos 6.X installation
The Centos 6.X can be download from the following Link
http://wiki.centos.org/Download
Centos 6.X installation steps can be found from following Link
http://www.tecmint.com/centos-6-5-installation-guide-with-screenshots/
http://wiki.centos.org/Download
Centos 6.X installation steps can be found from following Link
http://www.tecmint.com/centos-6-5-installation-guide-with-screenshots/
Disable Firewall and Selinux before starting the Installations
Stopping the Firewall
iptables -F
service iptables save
Disabling the Selinux
vim/etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing – SELinux security policy is enforced.
# permissive – SELinux prints warnings instead of enforcing.
# disabled – SELinux is fully disabled.
SELINUX=disabled
# SELINUXTYPE= type of policy in use. Possible values are:
# targeted – Only targeted network daemons are protected.
# strict – Full SELinux protection.
SELINUXTYPE=targeted
# SELINUX= can take one of these three values:
# enforcing – SELinux security policy is enforced.
# permissive – SELinux prints warnings instead of enforcing.
# disabled – SELinux is fully disabled.
SELINUX=disabled
# SELINUXTYPE= type of policy in use. Possible values are:
# targeted – Only targeted network daemons are protected.
# strict – Full SELinux protection.
SELINUXTYPE=targeted
# SETLOCALDEFS= Check local definition changes SETLOCALDEFS=0
Step 2 : Dependencies , supporting software and Perl Modules installation
First Update the OS for the lastest Kernel and other softwares and
yum –y update
reboot
yum –y update
reboot
Dependencies Installation :
yum install make patch gcc gcc-c++ subversion php php-devel php-gd gd-devel php-mbstring php-mcrypt php-imap php-ldap php-mysql php-odbc php-pear php-xml php-xmlrpc curl curl-devel perl-libwww-perl ImageMagick libxml2 libxml2-devel httpd libpcap libpcap-devel libnet ncurses ncurses-devel screen mysql-server mysql-devel ntp kernel* mutt glibc.i686
Setup Mysql
/etc/init.d/mysqld start
mysql_secure_installation
chkconfig mysqld on
mysql_secure_installation
chkconfig mysqld on
service mysqld stop
cp /etc/my.cnf /etc/my.cnf.original
echo “” > /etc/my.cnf
cp /etc/my.cnf /etc/my.cnf.original
echo “” > /etc/my.cnf
vi /etc/my.cnf ; copy the below config to this file.
[mysql.server]
user = mysql
#basedir = /var/lib
user = mysql
#basedir = /var/lib
[client]
port = 3306
socket = /var/lib/mysql/mysql.sock
port = 3306
socket = /var/lib/mysql/mysql.sock
[mysqld]
datadir = /var/lib/mysql
#tmpdir = /home/mysql_tmp
socket = /var/lib/mysql/mysql.sock
user = mysql
old_passwords = 0
ft_min_word_len = 3
max_connections = 800
max_allowed_packet = 32M
skip-external-locking
datadir = /var/lib/mysql
#tmpdir = /home/mysql_tmp
socket = /var/lib/mysql/mysql.sock
user = mysql
old_passwords = 0
ft_min_word_len = 3
max_connections = 800
max_allowed_packet = 32M
skip-external-locking
log-error = /var/log/mysqld/mysqld.log
query-cache-type = 1
query-cache-size = 32M
query-cache-size = 32M
long_query_time = 1
#slow_query_log = 1
#slow_query_log_file = /var/log/mysqld/slow-queries.log
#slow_query_log = 1
#slow_query_log_file = /var/log/mysqld/slow-queries.log
tmp_table_size = 128M
table_cache = 1024
table_cache = 1024
join_buffer_size = 1M
key_buffer = 512M
sort_buffer_size = 6M
read_buffer_size = 4M
read_rnd_buffer_size = 16M
myisam_sort_buffer_size = 64M
key_buffer = 512M
sort_buffer_size = 6M
read_buffer_size = 4M
read_rnd_buffer_size = 16M
myisam_sort_buffer_size = 64M
max_tmp_tables = 64
thread_cache_size = 8
thread_concurrency = 8
thread_concurrency = 8
# If using replication, uncomment log-bin below
#log-bin = mysql-bin
#log-bin = mysql-bin
[mysqldump]
quick
max_allowed_packet = 16M
quick
max_allowed_packet = 16M
[mysql]
no-auto-rehash
no-auto-rehash
[isamchk]
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M
[myisamchk]
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M
[mysqlhotcopy]
interactive-timeout
interactive-timeout
[mysqld_safe]
#log-error = /var/log/mysqld/mysqld.log
#pid-file = /var/run/mysqld/mysqld.pid
#log-error = /var/log/mysqld/mysqld.log
#pid-file = /var/run/mysqld/mysqld.pid
#Save your data.
mkdir /var/log/mysqld
mv /var/log/mysqld.log /var/log/mysqld/mysqld.log
touch /var/log/mysqld/slow-queries.log
chown -R mysql:mysql /var/log/mysqld
service mysqld restart
mv /var/log/mysqld.log /var/log/mysqld/mysqld.log
touch /var/log/mysqld/slow-queries.log
chown -R mysql:mysql /var/log/mysqld
service mysqld restart
Update the Timezone
Configure the system time and update it.
Customize the timezone. Take a look inside /usr/share/zoneinfo/ for all possible values.
rm /etc/localtime
ln -sf /usr/share/zoneinfo/Asia/Kolkata /etc/localtime
rdate -s nist1-ny.ustiming.org
Customize the timezone. Take a look inside /usr/share/zoneinfo/ for all possible values.
rm /etc/localtime
ln -sf /usr/share/zoneinfo/Asia/Kolkata /etc/localtime
rdate -s nist1-ny.ustiming.org
Setup CPAN and install libraries
yum install perl-CPAN
yum install perl-YAML
perl -MCPAN -e shell ; just press enter for all the questions
yum install perl-YAML
perl -MCPAN -e shell ; just press enter for all the questions
You will then go through CPAN setup, just hit ENTER for most prompts except
for the mirrors list, you will want to select at least 4 mirrors
yes for manual configuration
enter for the next 18 prompts
for the “make install” option, it’s a good idea to add UNINST=1
enter for the next 4 prompts
select your continent and country
select a few cpan mirrors
enter for the next 2 prompts
Once you see the cpan> prompt you can begin installing modules.
for the mirrors list, you will want to select at least 4 mirrors
yes for manual configuration
enter for the next 18 prompts
for the “make install” option, it’s a good idea to add UNINST=1
enter for the next 4 prompts
select your continent and country
select a few cpan mirrors
enter for the next 2 prompts
Once you see the cpan> prompt you can begin installing modules.
install CPAN::Meta::Requirements
install CPAN
reload cpan
install YAML
install MD5
install Digest::MD5
install Digest::SHA1
install readline
install Bundle::CPAN
reload cpan
install DBI
force install DBD::mysql
install Net::Telnet
install Time::HiRes
install Net::Server
install Switch
install Mail::Sendmail
install Unicode::Map
install Jcode
install Spreadsheet::WriteExcel
install OLE::Storage_Lite
install Proc::ProcessTable
install IO::Scalar
install Spreadsheet::ParseExcel
install Curses
install Getopt::Long
install Net::Domain
install Term::ReadKey
install Term::ANSIColor
install Spreadsheet::XLSX
install Spreadsheet::Read
install LWP::UserAgent
install HTML::Entities
install HTML::Strip
install HTML::FormatText
install HTML::TreeBuilder
install Time::Local
install MIME::Decoder
install Mail::POP3Client
install Mail::IMAPClient
install Mail::Message
install IO::Socket::SSL
install MIME::Base64
install MIME::QuotedPrint
install Crypt::Eksblowfish::Bcrypt
quit
install CPAN
reload cpan
install YAML
install MD5
install Digest::MD5
install Digest::SHA1
install readline
install Bundle::CPAN
reload cpan
install DBI
force install DBD::mysql
install Net::Telnet
install Time::HiRes
install Net::Server
install Switch
install Mail::Sendmail
install Unicode::Map
install Jcode
install Spreadsheet::WriteExcel
install OLE::Storage_Lite
install Proc::ProcessTable
install IO::Scalar
install Spreadsheet::ParseExcel
install Curses
install Getopt::Long
install Net::Domain
install Term::ReadKey
install Term::ANSIColor
install Spreadsheet::XLSX
install Spreadsheet::Read
install LWP::UserAgent
install HTML::Entities
install HTML::Strip
install HTML::FormatText
install HTML::TreeBuilder
install Time::Local
install MIME::Decoder
install Mail::POP3Client
install Mail::IMAPClient
install Mail::Message
install IO::Socket::SSL
install MIME::Base64
install MIME::QuotedPrint
install Crypt::Eksblowfish::Bcrypt
quit
In the end, I usually run all these commands once again to make sure its all installed. and make sure you get following output for each modul
cpan> install Mail::Message
Mail::Message is up to date (2.115).
Mail::Message is up to date (2.115).
cpan> install MIME::QuotedPrint MIME::QuotedPrint is up to date (3.13)
Installing the Asterisk-Perl module
NOTE: Do NOT use the 0.09 or any newer version, they do not work with ViciDial/iConnect.
cd /usr/src
wget http://download.vicidial.com/required-apps/asterisk-perl-0.08.tar.gz
tar -zxf asterisk-perl-0.08.tar.gz
cd asterisk-perl-0.08
perl Makefile.PL
make all
make install
cd /usr/src
wget http://download.vicidial.com/required-apps/asterisk-perl-0.08.tar.gz
tar -zxf asterisk-perl-0.08.tar.gz
cd asterisk-perl-0.08
perl Makefile.PL
make all
make install
Installing additional software from source
Next, you will download, compile and install the following software.
lame
ttyload
iftop
mtop
mytop
htop
sipsak
ploticus
lame
ttyload
iftop
mtop
mytop
htop
sipsak
ploticus
LAME:
LAME is an MP3 encoder used to convert audio files from WAV to MP3. Some prefer GSM usually, but others have standardized on MP3 so you would need this utility to be loaded to use that option.
cd /usr/src
wget http://downloads.sourceforge.net/project/lame/lame/3.99/lame-3.99.5.tar.gz
tar -zxf lame-3.99.5.tar.gz
cd lame-3.99.5
./configure
make
make install
cd /usr/src
wget http://downloads.sourceforge.net/project/lame/lame/3.99/lame-3.99.5.tar.gz
tar -zxf lame-3.99.5.tar.gz
cd lame-3.99.5
./configure
make
make install
SOX:
SoX is a cross-platform command line utility that can convert various formats of computer audio files in to other formats.
cd /usr/src
wget http://downloads.sourceforge.net/project/sox/sox/14.4.1/sox-14.4.1.tar.gz
tar -zxf sox-14.4.1.tar.gz
cd sox-14.4.1
./configure
make -s
make install
cd /usr/src
wget http://downloads.sourceforge.net/project/sox/sox/14.4.1/sox-14.4.1.tar.gz
tar -zxf sox-14.4.1.tar.gz
cd sox-14.4.1
./configure
make -s
make install
TTYLOAD:
ttyload is a simple terminal application that shows the processor load in a graphical time-based scrolling graph. I use it to view how loaded the system is and it visualizes load spikes very well.
cd /usr/src
wget http://download.vicidial.com/required-apps/ttyload-0.5.tar.gz
tar -xvzf ttyload-0.5.tar.gz
cd ttyload-0.5
nano ttyload.h
cd /usr/src
wget http://download.vicidial.com/required-apps/ttyload-0.5.tar.gz
tar -xvzf ttyload-0.5.tar.gz
cd ttyload-0.5
nano ttyload.h
insert this #include directive just above the #define directives, then save and close the ttyload.h file
#include
#include
make
ln -s /usr/src/ttyload-0.5/ttyload /usr/bin/ttyload
ln -s /usr/src/ttyload-0.5/ttyload /usr/bin/ttyload
IFTOP:
iftop is a good console bandwidth visualization tool that shows you active connections, where they are going to/from and how much of your precious bandwidth they are using.
cd /usr/src
wget http://www.ex-parrot.com/~pdw/iftop/download/iftop-0.17.tar.gz
tar -zxf iftop-0.17.tar.gz
cd iftop-0.17
./configure
make
make install
cd /usr/src
wget http://www.ex-parrot.com/~pdw/iftop/download/iftop-0.17.tar.gz
tar -zxf iftop-0.17.tar.gz
cd iftop-0.17
./configure
make
make install
MTOP:
Mtop is a great utility for real-time monitoring of mysql and the queries that are running in it.
Note: the root mysql password must be blank before installing this
cd /usr/src
wget http://download.vicidial.com/required-apps/mtop-0.6.6.tar.gz
tar -zxf mtop-0.6.6.tar.gz
cd mtop-0.6.6
perl Makefile.PL
make
make install
Note: the root mysql password must be blank before installing this
cd /usr/src
wget http://download.vicidial.com/required-apps/mtop-0.6.6.tar.gz
tar -zxf mtop-0.6.6.tar.gz
cd mtop-0.6.6
perl Makefile.PL
make
make install
MYTOP:
Mytop is is an optional utility for monitoring the threads and overall performance of mysql
Note: the root mysql password must be blank before installing this
cd /usr/src
wget http://jeremy.zawodny.com/mysql/mytop/mytop-1.6.tar.gz
tar -zxf mytop-1.6.tar.gz
cd mytop-1.6
perl Makefile.PL
make
make test
make install
Note: the root mysql password must be blank before installing this
cd /usr/src
wget http://jeremy.zawodny.com/mysql/mytop/mytop-1.6.tar.gz
tar -zxf mytop-1.6.tar.gz
cd mytop-1.6
perl Makefile.PL
make
make test
make install
HTOP:
Htop is an interactive process viewer for Linux
cd /usr/src
wget http://downloads.sourceforge.net/project/htop/htop/1.0.2/htop-1.0.2.tar.gz
tar -zxf htop-1.0.2.tar.gz
cd htop-1.0.2
./configure
make
make install
cd /usr/src
wget http://downloads.sourceforge.net/project/htop/htop/1.0.2/htop-1.0.2.tar.gz
tar -zxf htop-1.0.2.tar.gz
cd htop-1.0.2
./configure
make
make install
SIPSAK:
sipsak is an optional utility that VICIDIAL/iConnect can use to send messages to an agent’s SIP-based phone(like the Snom 320) to display text on their LCD screen.
cd /usr/src
wget http://download.vicidial.com/required-apps/sipsak-0.9.6-1.tar.gz
tar -zxf sipsak-0.9.6-1.tar.gz
cd sipsak-0.9.6
./configure
make
make install
/usr/local/bin/sipsak –version
sipsak is an optional utility that VICIDIAL/iConnect can use to send messages to an agent’s SIP-based phone(like the Snom 320) to display text on their LCD screen.
cd /usr/src
wget http://download.vicidial.com/required-apps/sipsak-0.9.6-1.tar.gz
tar -zxf sipsak-0.9.6-1.tar.gz
cd sipsak-0.9.6
./configure
make
make install
/usr/local/bin/sipsak –version
PLOTICUS:
Ploticus is a free graph creation package that allows you to create line graphs within PNG files simply by creating a config file and a data file. ViciDial/iConnect uses this package to generate server performance graphs that can be displayed real-time within the ViciDial/iConnect reports page.
cd /usr/src
wget http://downloads.sourceforge.net/project/ploticus/ploticus/2.42/ploticus242_src.tar.gz
tar -zxf ploticus242_src.tar.gz
cd ploticus242/src/
make clean
make
make install
mkdir -p /var/www/html/vicidial/ploticus/
cp pl /var/www/html/vicidial/ploticus/
Ploticus is a free graph creation package that allows you to create line graphs within PNG files simply by creating a config file and a data file. ViciDial/iConnect uses this package to generate server performance graphs that can be displayed real-time within the ViciDial/iConnect reports page.
cd /usr/src
wget http://downloads.sourceforge.net/project/ploticus/ploticus/2.42/ploticus242_src.tar.gz
tar -zxf ploticus242_src.tar.gz
cd ploticus242/src/
make clean
make
make install
mkdir -p /var/www/html/vicidial/ploticus/
cp pl /var/www/html/vicidial/ploticus/
eAccelerator :
cd /usr/src
wget http://downloads.sourceforge.net/project/eaccelerator/eaccelerator/eAccelerator%200.9.6.1/eaccelerator-0.9.6.1.zip
unzip eaccelerator-0.9.6.1.zip
cd eaccelerator-0.9.6.1
export PHP_PREFIX=”/usr”
$PHP_PREFIX/bin/phpize
./configure –enable-eaccelerator=shared –with-php-config=$PHP_PREFIX/bin/php-config
make
make install
cd /usr/src
wget http://downloads.sourceforge.net/project/eaccelerator/eaccelerator/eAccelerator%200.9.6.1/eaccelerator-0.9.6.1.zip
unzip eaccelerator-0.9.6.1.zip
cd eaccelerator-0.9.6.1
export PHP_PREFIX=”/usr”
$PHP_PREFIX/bin/phpize
./configure –enable-eaccelerator=shared –with-php-config=$PHP_PREFIX/bin/php-config
make
make install
Configure php.ini
vim /etc/php.ini
Change the following values in your php.ini file.
Customize the date.timezone so you don’t end up with a bunch of php errors complaining about it not being defined.
vim /etc/php.ini
Change the following values in your php.ini file.
Customize the date.timezone so you don’t end up with a bunch of php errors complaining about it not being defined.
error_reporting = E_ALL & ~E_NOTICE
memory_limit = 48M
short_open_tag = On
max_execution_time = 330
max_input_time = 360
post_max_size = 48M
upload_max_filesize = 42M
default_socket_timeout = 360
date.timezone = Asia/Kolkata
memory_limit = 48M
short_open_tag = On
max_execution_time = 330
max_input_time = 360
post_max_size = 48M
upload_max_filesize = 42M
default_socket_timeout = 360
date.timezone = Asia/Kolkata
Add the following lines to the dynamic extensions section of php.ini:
Note: For CentOS 32-bit, use this below: zend_extension=”/usr/lib/php/modules/eaccelerator.so”
Note: For CentOS 32-bit, use this below: zend_extension=”/usr/lib/php/modules/eaccelerator.so”
;Dynamic Extensions
zend_extension=”/usr/lib64/php/modules/eaccelerator.so”
;For CentOS 32-bit: zend_extension=”/usr/lib/php/modules/eaccelerator.so”
eaccelerator.shm_size=”48″
eaccelerator.cache_dir=”/tmp/eaccelerator”
eaccelerator.enable=”1″
eaccelerator.optimizer=”1″
eaccelerator.check_mtime=”1″
eaccelerator.debug=”0″
eaccelerator.filter=””
eaccelerator.shm_max=”0″
eaccelerator.shm_ttl=”0″
eaccelerator.shm_prune_period=”0″
eaccelerator.shm_only=”0″
eaccelerator.compress=”1″
eaccelerator.compress_level=”9″
zend_extension=”/usr/lib64/php/modules/eaccelerator.so”
;For CentOS 32-bit: zend_extension=”/usr/lib/php/modules/eaccelerator.so”
eaccelerator.shm_size=”48″
eaccelerator.cache_dir=”/tmp/eaccelerator”
eaccelerator.enable=”1″
eaccelerator.optimizer=”1″
eaccelerator.check_mtime=”1″
eaccelerator.debug=”0″
eaccelerator.filter=””
eaccelerator.shm_max=”0″
eaccelerator.shm_ttl=”0″
eaccelerator.shm_prune_period=”0″
eaccelerator.shm_only=”0″
eaccelerator.compress=”1″
eaccelerator.compress_level=”9″
#Save your data
mkdir /tmp/eaccelerator
chmod 0777 /tmp/eaccelerator
php –v
chmod 0777 /tmp/eaccelerator
php –v
Editing the Apache config file
vi /etc/httpd/conf/httpd.conf
To disable logging, change:
vi /etc/httpd/conf/httpd.conf
To disable logging, change:
CustomLog logs/access_log common
to this:
CustomLog /dev/null common
to this:
CustomLog /dev/null common
To enable web browsing of Recordings on Asterisk server, add the below line at last line of httpd.conf
Alias /RECORDINGS/ “/var/spool/asterisk/monitorDONE/”
Alias /RECORDINGS/ “/var/spool/asterisk/monitorDONE/”
<directory “=”” var=”” spool=”” asterisk=”” monitordone”=””>
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
Forcetype application/forcedownload
Restart the Apache web server to apply the changes
service httpd restart
chkconfig httpd on
chkconfig httpd on
Installing Asterisk
Any time you upgrade the Linux kernel you must recompile/install dahdi for the new kernel.
Asterisk must be compiled with dahdi support.
Note: The install MUST be done in the following order:
Minor note: dahdi-linux-complete-current.tar.gz and libpri-1.4-current.tar.gz may contain an updated version than what I am currently using, therefore the directory names may be different than shown below.
Asterisk must be compiled with dahdi support.
Note: The install MUST be done in the following order:
Minor note: dahdi-linux-complete-current.tar.gz and libpri-1.4-current.tar.gz may contain an updated version than what I am currently using, therefore the directory names may be different than shown below.
mkdir /usr/src/asterisk
cd /usr/src/asterisk
wget http://download.vicidial.com/required-apps/asterisk-1.8.23.0-vici.tar.gz
wget http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.4-current.tar.gz
tar -zxf asterisk-1.8.23.0-vici.tar.gz
tar -zxf dahdi-linux-complete-current.tar.gz
tar -zxf libpri-1.4-current.tar.gz
cd ../dahdi-linux-complete-2.9.1.1+2.9.1
make clean
make all
make install
make config
cd ../../libpri-1.4.15
make clean
make
make install
cd ../asterisk-1.8.23.0
./configure
make clean
make
make install
make samples
cd /usr/src/asterisk
wget http://download.vicidial.com/required-apps/asterisk-1.8.23.0-vici.tar.gz
wget http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.4-current.tar.gz
tar -zxf asterisk-1.8.23.0-vici.tar.gz
tar -zxf dahdi-linux-complete-current.tar.gz
tar -zxf libpri-1.4-current.tar.gz
cd ../dahdi-linux-complete-2.9.1.1+2.9.1
make clean
make all
make install
make config
cd ../../libpri-1.4.15
make clean
make
make install
cd ../asterisk-1.8.23.0
./configure
make clean
make
make install
make samples
cp /usr/src/asterisk/asterisk-1.8.23.0/contrib/init.d/rc.redhat.asterisk /etc/init.d/asterisk
chkconfig asterisk on
chkconfig asterisk on
service dahdi restart
chkconfig dahdi on
modprobe dahdi
chkconfig dahdi on
modprobe dahdi
Installing audio files
Download the audio files
Download the audio files
cd /usr/src
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-core-sounds-en-ulaw-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-core-sounds-en-wav-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-core-sounds-en-gsm-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-extra-sounds-en-ulaw-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-extra-sounds-en-wav-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-extra-sounds-en-gsm-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-moh-opsound-gsm-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-moh-opsound-ulaw-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-moh-opsound-wav-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-core-sounds-en-ulaw-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-core-sounds-en-wav-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-core-sounds-en-gsm-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-extra-sounds-en-ulaw-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-extra-sounds-en-wav-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-extra-sounds-en-gsm-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-moh-opsound-gsm-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-moh-opsound-ulaw-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-moh-opsound-wav-current.tar.gz
Place the audio files in their proper places
cd /var/lib/asterisk/sounds
tar -zxf /usr/src/asterisk-core-sounds-en-gsm-current.tar.gz
tar -zxf /usr/src/asterisk-core-sounds-en-ulaw-current.tar.gz
tar -zxf /usr/src/asterisk-core-sounds-en-wav-current.tar.gz
tar -zxf /usr/src/asterisk-extra-sounds-en-gsm-current.tar.gz
tar -zxf /usr/src/asterisk-extra-sounds-en-ulaw-current.tar.gz
tar -zxf /usr/src/asterisk-extra-sounds-en-wav-current.tar.gz
cd /var/lib/asterisk/sounds
tar -zxf /usr/src/asterisk-core-sounds-en-gsm-current.tar.gz
tar -zxf /usr/src/asterisk-core-sounds-en-ulaw-current.tar.gz
tar -zxf /usr/src/asterisk-core-sounds-en-wav-current.tar.gz
tar -zxf /usr/src/asterisk-extra-sounds-en-gsm-current.tar.gz
tar -zxf /usr/src/asterisk-extra-sounds-en-ulaw-current.tar.gz
tar -zxf /usr/src/asterisk-extra-sounds-en-wav-current.tar.gz
mkdir /var/lib/asterisk/mohmp3
mkdir /var/lib/asterisk/quiet-mp3
ln -s /var/lib/asterisk/mohmp3 /var/lib/asterisk/default
mkdir /var/lib/asterisk/quiet-mp3
ln -s /var/lib/asterisk/mohmp3 /var/lib/asterisk/default
cd /var/lib/asterisk/mohmp3
tar -zxf /usr/src/asterisk-moh-opsound-gsm-current.tar.gz
tar -zxf /usr/src/asterisk-moh-opsound-ulaw-current.tar.gz
tar -zxf /usr/src/asterisk-moh-opsound-wav-current.tar.gz
rm -f CHANGES*
rm -f LICENSE*
rm -f CREDITS*
tar -zxf /usr/src/asterisk-moh-opsound-gsm-current.tar.gz
tar -zxf /usr/src/asterisk-moh-opsound-ulaw-current.tar.gz
tar -zxf /usr/src/asterisk-moh-opsound-wav-current.tar.gz
rm -f CHANGES*
rm -f LICENSE*
rm -f CREDITS*
cd /var/lib/asterisk/moh
rm -f CHANGES*
rm -f LICENSE*
rm -f CREDITS*
rm -f CHANGES*
rm -f LICENSE*
rm -f CREDITS*
cd /var/lib/asterisk/sounds
rm -f CHANGES*
rm -f LICENSE*
rm -f CREDITS*
rm -f CHANGES*
rm -f LICENSE*
rm -f CREDITS*
cd /var/lib/asterisk/quiet-mp3
sox ../mohmp3/macroform-cold_day.wav macroform-cold_day.wav vol 0.25
sox ../mohmp3/macroform-cold_day.gsm macroform-cold_day.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/macroform-cold_day.ulaw -t ul macroform-cold_day.ulaw vol 0.25
sox ../mohmp3/macroform-robot_dity.wav macroform-robot_dity.wav vol 0.25
sox ../mohmp3/macroform-robot_dity.gsm macroform-robot_dity.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/macroform-robot_dity.ulaw -t ul macroform-robot_dity.ulaw vol 0.25
sox ../mohmp3/macroform-the_simplicity.wav macroform-the_simplicity.wav vol 0.25
sox ../mohmp3/macroform-the_simplicity.gsm macroform-the_simplicity.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/macroform-the_simplicity.ulaw -t ul macroform-the_simplicity.ulaw vol 0.25
sox ../mohmp3/reno_project-system.wav reno_project-system.wav vol 0.25
sox ../mohmp3/reno_project-system.gsm reno_project-system.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/reno_project-system.ulaw -t ul reno_project-system.ulaw vol 0.25
sox ../mohmp3/manolo_camp-morning_coffee.wav manolo_camp-morning_coffee.wav vol 0.25
sox ../mohmp3/manolo_camp-morning_coffee.gsm manolo_camp-morning_coffee.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/manolo_camp-morning_coffee.ulaw -t ul manolo_camp-morning_coffee.ulaw vol 0.25
sox ../mohmp3/macroform-cold_day.wav macroform-cold_day.wav vol 0.25
sox ../mohmp3/macroform-cold_day.gsm macroform-cold_day.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/macroform-cold_day.ulaw -t ul macroform-cold_day.ulaw vol 0.25
sox ../mohmp3/macroform-robot_dity.wav macroform-robot_dity.wav vol 0.25
sox ../mohmp3/macroform-robot_dity.gsm macroform-robot_dity.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/macroform-robot_dity.ulaw -t ul macroform-robot_dity.ulaw vol 0.25
sox ../mohmp3/macroform-the_simplicity.wav macroform-the_simplicity.wav vol 0.25
sox ../mohmp3/macroform-the_simplicity.gsm macroform-the_simplicity.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/macroform-the_simplicity.ulaw -t ul macroform-the_simplicity.ulaw vol 0.25
sox ../mohmp3/reno_project-system.wav reno_project-system.wav vol 0.25
sox ../mohmp3/reno_project-system.gsm reno_project-system.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/reno_project-system.ulaw -t ul reno_project-system.ulaw vol 0.25
sox ../mohmp3/manolo_camp-morning_coffee.wav manolo_camp-morning_coffee.wav vol 0.25
sox ../mohmp3/manolo_camp-morning_coffee.gsm manolo_camp-morning_coffee.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/manolo_camp-morning_coffee.ulaw -t ul manolo_camp-morning_coffee.ulaw vol 0.25
Installing astGUIclient (ViciDial/iConnect)
First, login to mysql to create the database, add a couple users and assign privileges.
mysql -u root –p
mysql -u root –p
Enter these MySQL commands:
CREATE DATABASE `asterisk` DEFAULT CHARACTER SET utf8 COLLATE utf8_unicode_ci;
CREATE USER ‘cron’@’localhost’ IDENTIFIED BY ‘1234’;
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO cron@’%’ IDENTIFIED BY ‘1234’;
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO cron@localhost IDENTIFIED BY ‘1234’;
GRANT RELOAD ON *.* TO cron@’%’;
GRANT RELOAD ON *.* TO cron@localhost;
flush privileges;
quit
CREATE USER ‘cron’@’localhost’ IDENTIFIED BY ‘1234’;
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO cron@’%’ IDENTIFIED BY ‘1234’;
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO cron@localhost IDENTIFIED BY ‘1234’;
GRANT RELOAD ON *.* TO cron@’%’;
GRANT RELOAD ON *.* TO cron@localhost;
flush privileges;
quit
I am going to install the latest 2.x SVN trunk which happens to be version 2.8 at the time of writing this guide
mkdir /usr/src/astguiclient
cd /usr/src/astguiclient
svn checkout svn://svn.eflo.net:3690/agc_2-X/trunk
cd trunk
perl install.pl
cd /usr/src/astguiclient
svn checkout svn://svn.eflo.net:3690/agc_2-X/trunk
cd trunk
perl install.pl
You will have to define various things like IP address of the server
It will also ask you where is the web root, use /var/www/html
Leave the other login settings as-is unless you already know how to update the database and other asterisk config files.
It will also ask you where is the web root, use /var/www/html
Leave the other login settings as-is unless you already know how to update the database and other asterisk config files.
Import sample data
Login to mysql to run some commands
Login to mysql to run some commands
mysql -u root -p
Enter these MySQL commands:
Enter these MySQL commands:
mysql>SET GLOBAL connect_timeout=60;
mysql>use asterisk;
mysql>use asterisk;
mysql>\. /usr/src/astguiclient/trunk/extras/MySQL_AST_CREATE_tables.sql
mysql>\. /usr/src/astguiclient/trunk/extras/first_server_install.sql
mysql>\. /usr/src/astguiclient/trunk/extras/sip-iax_phones.sql
mysql>\. /usr/src/astguiclient/trunk/extras/first_server_install.sql
mysql>\. /usr/src/astguiclient/trunk/extras/sip-iax_phones.sql
mysql>quit
In the Linux terminal, enter these commands
/usr/share/astguiclient /ADMIN_area_code_populate.pl
/usr/share/astguiclient /ADMIN_area_code_populate.pl
Final Adjustments
Make several entries in the rc.local of your system.
vi /etc/rc.d/rc.local
On a new system I just overwrite the file with the following:
#!/bin/sh
#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don’t
# want to do the full Sys V style init stuff.
touch /var/lock/subsys/local
# OPTIONAL enable ip_relay(for same-machine trunking and blind monitoring)
/usr/share/astguiclient/ip_relay/relay_control start 2>/dev/null 1>&2
# Disable console blanking and powersaving
/usr/bin/setterm -blank
/usr/bin/setterm -powersave off
/usr/bin/setterm -powerdown
### start up the MySQL server
/etc/init.d/mysqld start
### start up the apache web server
/etc/init.d/httpd start
### roll the Asterisk logs upon reboot
/usr/share/astguiclient/ADMIN_restart_roll_logs.pl
### clear the server-related records from the database
/usr/share/astguiclient/AST_reset_mysql_vars.pl
### load dahdi drivers
modprobe dahdi
/usr/sbin/dahdi_cfg -vvvvvvvvvvvvv
### sleep for 20 seconds before launching Asterisk
sleep 20
### start up asterisk
/usr/share/astguiclient/start_asterisk_boot.pl
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don’t
# want to do the full Sys V style init stuff.
touch /var/lock/subsys/local
# OPTIONAL enable ip_relay(for same-machine trunking and blind monitoring)
/usr/share/astguiclient/ip_relay/relay_control start 2>/dev/null 1>&2
# Disable console blanking and powersaving
/usr/bin/setterm -blank
/usr/bin/setterm -powersave off
/usr/bin/setterm -powerdown
### start up the MySQL server
/etc/init.d/mysqld start
### start up the apache web server
/etc/init.d/httpd start
### roll the Asterisk logs upon reboot
/usr/share/astguiclient/ADMIN_restart_roll_logs.pl
### clear the server-related records from the database
/usr/share/astguiclient/AST_reset_mysql_vars.pl
### load dahdi drivers
modprobe dahdi
/usr/sbin/dahdi_cfg -vvvvvvvvvvvvv
### sleep for 20 seconds before launching Asterisk
sleep 20
### start up asterisk
/usr/share/astguiclient/start_asterisk_boot.pl
Make several entries in the crontab of your system:
crontab –e
crontab –e
### recording mixing/compressing/ftping scripts
#0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl
0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl –MIX
0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_VDonly.pl
1,4,7,10,13,16,19,22,25,28,31,34,37,40,43,46,49,52,55,58 * * * * /usr/share/astguiclient/AST_CRON_audio_2_compress.pl –-MP3
#2,5,8,11,14,17,20,23,26,29,32,35,38,41,44,47,50,53,56,59 * * * * /usr/share/astguiclient/AST_CRON_audio_3_ftp.pl –GSM
### keepalive script for astguiclient processes
* * * * * /usr/share/astguiclient/ADMIN_keepalive_ALL.pl –cu3way
### kill Hangup script for Asterisk updaters
* * * * * /usr/share/astguiclient/AST_manager_kill_hung_congested.pl
### updater for voicemail
* * * * * /usr/share/astguiclient/AST_vm_update.pl
### updater for conference validator
* * * * * /usr/share/astguiclient/AST_conf_update.pl
### flush queue DB table every hour for entries older than 1 hour
11 * * * * /usr/share/astguiclient/AST_flush_DBqueue.pl -q
### fix the vicidial_agent_log once every hour and the full day run at night
33 * * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl
50 0 * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl –last-24hours
## uncomment below if using QueueMetrics
#*/5 * * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl –only-qm-live-call-check
## uncomment below if using Vtiger
#1 1 * * * /usr/share/astguiclient/Vtiger_optimize_all_tables.pl –quiet
### updater for VICIDIAL hopper
* * * * * /usr/share/astguiclient/AST_VDhopper.pl -q
### adjust the GMT offset for the leads in the vicidial_list table
1 1,7 * * * /usr/share/astguiclient/ADMIN_adjust_GMTnow_on_leads.pl –debug
### reset several temporary-info tables in the database
2 1 * * * /usr/share/astguiclient/AST_reset_mysql_vars.pl
### optimize the database tables within the asterisk database
3 1 * * * /usr/share/astguiclient/AST_DB_optimize.pl
## adjust time on the server with ntp
30 * * * * /usr/sbin/ntpdate -u pool.ntp.org 2>/dev/null 1>&2
### VICIDIAL agent time log weekly and daily summary report generation
2 0 * * 0 /usr/share/astguiclient/AST_agent_week.pl
22 0 * * * /usr/share/astguiclient/AST_agent_day.pl
### VICIDIAL campaign export scripts (OPTIONAL)
#32 0 * * * /usr/share/astguiclient/AST_VDsales_export.pl
#42 0 * * * /usr/share/astguiclient/AST_sourceID_summary_export.pl
### remove old recordings more than 7 days old
#24 0 * * * /usr/bin/find /var/spool/asterisk/monitorDONE -maxdepth 2 -type f -mtime +7 -print | xargs rm -f
### roll logs monthly on high-volume dialing systems
#30 1 1 * * /usr/share/astguiclient/ADMIN_archive_log_tables.pl
### remove old vicidial logs and asterisk logs more than 2 days old
28 0 * * * /usr/bin/find /var/log/astguiclient -maxdepth 1 -type f -mtime +2 -print | xargs rm -f
29 0 * * * /usr/bin/find /var/log/asterisk -maxdepth 3 -type f -mtime +2 -print | xargs rm -f
30 0 * * * /usr/bin/find / -maxdepth 1 -name “screenlog.0*” -mtime +4 -print | xargs rm -f
### cleanup of the scheduled callback records
25 0 * * * /usr/share/astguiclient/AST_DB_dead_cb_purge.pl –purge-non-cb -q
### GMT adjust script – uncomment to enable
#45 0 * * * /usr/share/astguiclient/ADMIN_adjust_GMTnow_on_leads.pl –list-settings
### Dialer Inventory Report
1 7 * * * /usr/share/astguiclient/AST_dialer_inventory_snapshot.pl -q –override-24hours
### inbound email parser
* * * * * /usr/share/astguiclient/AST_inbound_email_parser.pl
#0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl
0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl –MIX
0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_VDonly.pl
1,4,7,10,13,16,19,22,25,28,31,34,37,40,43,46,49,52,55,58 * * * * /usr/share/astguiclient/AST_CRON_audio_2_compress.pl –-MP3
#2,5,8,11,14,17,20,23,26,29,32,35,38,41,44,47,50,53,56,59 * * * * /usr/share/astguiclient/AST_CRON_audio_3_ftp.pl –GSM
### keepalive script for astguiclient processes
* * * * * /usr/share/astguiclient/ADMIN_keepalive_ALL.pl –cu3way
### kill Hangup script for Asterisk updaters
* * * * * /usr/share/astguiclient/AST_manager_kill_hung_congested.pl
### updater for voicemail
* * * * * /usr/share/astguiclient/AST_vm_update.pl
### updater for conference validator
* * * * * /usr/share/astguiclient/AST_conf_update.pl
### flush queue DB table every hour for entries older than 1 hour
11 * * * * /usr/share/astguiclient/AST_flush_DBqueue.pl -q
### fix the vicidial_agent_log once every hour and the full day run at night
33 * * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl
50 0 * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl –last-24hours
## uncomment below if using QueueMetrics
#*/5 * * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl –only-qm-live-call-check
## uncomment below if using Vtiger
#1 1 * * * /usr/share/astguiclient/Vtiger_optimize_all_tables.pl –quiet
### updater for VICIDIAL hopper
* * * * * /usr/share/astguiclient/AST_VDhopper.pl -q
### adjust the GMT offset for the leads in the vicidial_list table
1 1,7 * * * /usr/share/astguiclient/ADMIN_adjust_GMTnow_on_leads.pl –debug
### reset several temporary-info tables in the database
2 1 * * * /usr/share/astguiclient/AST_reset_mysql_vars.pl
### optimize the database tables within the asterisk database
3 1 * * * /usr/share/astguiclient/AST_DB_optimize.pl
## adjust time on the server with ntp
30 * * * * /usr/sbin/ntpdate -u pool.ntp.org 2>/dev/null 1>&2
### VICIDIAL agent time log weekly and daily summary report generation
2 0 * * 0 /usr/share/astguiclient/AST_agent_week.pl
22 0 * * * /usr/share/astguiclient/AST_agent_day.pl
### VICIDIAL campaign export scripts (OPTIONAL)
#32 0 * * * /usr/share/astguiclient/AST_VDsales_export.pl
#42 0 * * * /usr/share/astguiclient/AST_sourceID_summary_export.pl
### remove old recordings more than 7 days old
#24 0 * * * /usr/bin/find /var/spool/asterisk/monitorDONE -maxdepth 2 -type f -mtime +7 -print | xargs rm -f
### roll logs monthly on high-volume dialing systems
#30 1 1 * * /usr/share/astguiclient/ADMIN_archive_log_tables.pl
### remove old vicidial logs and asterisk logs more than 2 days old
28 0 * * * /usr/bin/find /var/log/astguiclient -maxdepth 1 -type f -mtime +2 -print | xargs rm -f
29 0 * * * /usr/bin/find /var/log/asterisk -maxdepth 3 -type f -mtime +2 -print | xargs rm -f
30 0 * * * /usr/bin/find / -maxdepth 1 -name “screenlog.0*” -mtime +4 -print | xargs rm -f
### cleanup of the scheduled callback records
25 0 * * * /usr/share/astguiclient/AST_DB_dead_cb_purge.pl –purge-non-cb -q
### GMT adjust script – uncomment to enable
#45 0 * * * /usr/share/astguiclient/ADMIN_adjust_GMTnow_on_leads.pl –list-settings
### Dialer Inventory Report
1 7 * * * /usr/share/astguiclient/AST_dialer_inventory_snapshot.pl -q –override-24hours
### inbound email parser
* * * * * /usr/share/astguiclient/AST_inbound_email_parser.pl
Run this perl script to update the server_ip fields in the asterisk tables (copy the command as- it is)
/usr/share/astguiclient/ADMIN_update_server_ip.pl –old-server_ip=10.10.10.15
Update music on hold configuration
/usr/share/astguiclient/ADMIN_update_server_ip.pl –old-server_ip=10.10.10.15
Update music on hold configuration
vi /etc/asterisk/musiconhold.conf ; remove the word old
;
; Music on Hold — Sample Configuration
;
; Music on Hold — Sample Configuration
;
[default]
mode=files
directory=/var/lib/asterisk/mohmp3
mode=files
directory=/var/lib/asterisk/mohmp3
[quiet]
mode=files
directory=/var/lib/asterisk/quiet-mp3
mode=files
directory=/var/lib/asterisk/quiet-mp3
#include musiconhold-vicidial.conf
Lastly, reboot the machine
reboot
reboot
Diagnostics
After reboot, check your logs for any errors, make sure asterisk is up and running.
Be proactive and look for problems before you start configuring vicidial/iConnect.
Run these commands to view log files:
tail -f -n 50 /var/log/asterisk/messages
tail -f -n 50 /var/log/messages
more /var/log/dmesg
tail -f -n 40 /etc/httpd/logs/error_log
tail -f -n 40 /var/log/maillog
tail -f -n 40 /var/log/cron
Run this command:
Be proactive and look for problems before you start configuring vicidial/iConnect.
Run these commands to view log files:
tail -f -n 50 /var/log/asterisk/messages
tail -f -n 50 /var/log/messages
more /var/log/dmesg
tail -f -n 40 /etc/httpd/logs/error_log
tail -f -n 40 /var/log/maillog
tail -f -n 40 /var/log/cron
Run this command:
screen -ls
The output should look similar to this: 9or 10 sockets
There are screens on:
2307.ASTVDauto (Detached)
2147.astshell20140626063212 (Detached)
2105.ASTVDadapt (Detached)
2304.ASTlisten (Detached)
2301.ASTsend (Detached)
2153.asterisk (Detached)
2109.ASTconf3way (Detached)
2107.ASTfastlog (Detached)
2310.ASTVDremote (Detached)
2298.ASTupdate (Detached)
10 Sockets in /var/run/screen/S-root.
The output should look similar to this: 9or 10 sockets
There are screens on:
2307.ASTVDauto (Detached)
2147.astshell20140626063212 (Detached)
2105.ASTVDadapt (Detached)
2304.ASTlisten (Detached)
2301.ASTsend (Detached)
2153.asterisk (Detached)
2109.ASTconf3way (Detached)
2107.ASTfastlog (Detached)
2310.ASTVDremote (Detached)
2298.ASTupdate (Detached)
10 Sockets in /var/run/screen/S-root.
Start using vicidial
Login to vicidial and configure it.
Add users, campaigns, in-group, DID’s, server, etc….
Go to: http://youripaddress/vicidial/admin.php
The default username is: 6666 and the password is: 1234
Login to vicidial and configure it.
Add users, campaigns, in-group, DID’s, server, etc….
Go to: http://youripaddress/vicidial/admin.php
The default username is: 6666 and the password is: 1234
Comments
Post a Comment